F82- 12.5mm flush spacers VS 12mm front 10mm back- 666m wheels

[jonf49]

Would love to see your F82s with 12mm front 10mm rear spacers with 666m wheels

Thinking about doing a 12.5mm flush kit on the spacers, but I’d really like to see what this looks like with the 20” 666m wheels too.

Pics very much appreciated!

Thanks!

[Brad_T]

Check out this thread, you may find something there.
https://f80.bimmerpost.com/forums/sh....php?t=1275144

[jonf49]

Thanks.. very helpful. Any more pics comparing these two spacer setups would be appreciated!

The 12mm front and 10mm rear makes for a very even factory look.

I believe the 12.5 all around will give a slightly more aggressive rear stance …

But would love to see pictures on the 666m

[Sephrr]

https://f80.bimmerpost.com/forums/sh....php?t=1000804
This should have enough pictures to go through

[jonf49]

Originally Posted by Sephrr

https://f80.bimmerpost.com/forums/sh....php?t=1000804
This should have enough pictures to go through

Thanks for the post. I wasn’t able to find too many with 666m with the above configurations. But still an interesting post!

[Deano123]

Originally Posted by jonf49

Thanks for the post. I wasn’t able to find too many with 666m with the above configurations. But still an interesting post!

I have just had mine dropped with Eibach Pro springs and 12mm spacers added all round and it sits on the competition 666M alloys. It’s not exactly the same as your request but will give you some idea.

Not stopped raining and snowing since fitted but will add some pictures as soon as the weather improves.

[GregW / Oregon]

Originally Posted by jonf49

Would love to see your F82s with 12mm front 10mm rear spacers with 666m wheels

Thinking about doing a 12.5mm flush kit on the spacers, but I’d really like to see what this looks like with the 20” 666m wheels too.

Pics very much appreciated!

Here's mine with 12mm F&R (no drop). IMO, the difference between 10mm and 12mm (.08") is hardly discernable.

[jonf49]

Originally Posted by GregW / Oregon

Here's mine with 12mm F&R (no drop). IMO, the difference between 10mm and 12mm (.08") is hardly discernable.

Looks great! Thx

Do you have any side view pics of the car that you can share? Really want to see the wheel gap from a profile.

I’m amazed this is not lowered, it looks like it was, which is why several of us would love to see some other angles of the car… like a side profile pic, etc. Planning to lower it?
This has people questioning whether they should/should have lowered their car. Hah