|
|
|
06-17-2016, 01:14 PM | #1 |
Private
12
Rep 72
Posts |
Mixture control codes
Check engine light came on and i have 2 mixture control codes.
29E0 / 29E1 Mixture control / mixture control 2 I am now getting about 16mpg instead of around 19-20avg. Car also stalls out on cold starts, but seems to run O.K. when warmed up. Seems rather sluggish My car is a 2010 128i N51 Anyone have similar issues? Any suggestions? Haven't had too much time to diagnose this problem but I will post updates when I get to it. |
08-05-2016, 08:44 AM | #5 |
Private
12
Rep 72
Posts |
Checked fuel pressure and it tested very low (3.5 bar) so I'm thinking fuel pump or pressure regulator. I dropped my 1er at BMW on tuesday and they informed me its a fuel delivery issue. They will be replacing my fuel tank 100% covered under SULEV warranty. WHEW! Thought all hope was lost! BMW really came through for me here
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|