[madriz]

I have the stock suspension, and I want to put a threaded suspension. If I lowered the front 2cm or 1 inch. How much camber of gain could I have?

[johnung]

Originally Posted by madriz

I have the stock suspension, and I want to put a threaded suspension. If I lowered the front 2cm or 1 inch. How much camber of gain could I have?

Anytime that suspension changes are done the alignment should be done anyway so you’ll find out then

[madriz]

Originally Posted by johnung

Anytime that suspension changes are done the alignment should be done anyway so you’ll find out then

I know, but until I make the changes I won't know. My question is if anyone has experience in this, since any gain in curvature would be welcome.

[weehe126]

A 1" drop would probably be 0.2° max added camber.

[madriz]

Thank you!

[Polo08816]

Originally Posted by weehe126

A 1" drop would probably be 0.2° max added camber.

I think it's a bit more than that. The M Performance Suspension is a 10mm drop but increases front camber by about 0.5 degrees.

[madriz]

Originally Posted by Polo08816

I think it's a bit more than that. The M Performance Suspension is a 10mm drop but increases front camber by about 0.5 degrees.

What camber do you have?

[Polo08816]

Originally Posted by madriz

What camber do you have?

I'm currently at about -1.75 to -2.00 because I have the -0.5 camber correcting wheel hubs, M3 control arms, and M Performance suspension kit.

-1.75 to -2.0 is fine for daily driving. For the track, you really want to be able to achieve -2.25 to -3.25 which will usually require camber plates.