[ashiifi]

BIMMERPOST / Classifieds

Asking Price:

Sold

Item Interest

Well, the time has come, and the E46 track car is now for sale. If you are looking for a turn key track build, this is the one. Below is the list of modifications which should speak for themselves, as well as a google drive folder of pictures of the car.

Story time:

The car is a true track build, and is setup for that purpose. It has the rare ability to drive back home from the track as a street car. It has working AC, thats the kind of car it is. I mention this because while it can be driven on the street, it is not a street car. The car has no carpet, the engine and transmission are essentially solidly mounted to the frame. This is not meant to drive your boyfriend to starbucks on a sunday, it is purpose built with the ability to be driven on the street, not the other way around.

This being said, it has also been built right, with the smallest details accounted for. The Gray and Repsol Orange theme is carried around the entire car including the roll cage, mirrors, wheels, shifter all matching perfectly. The car has two sets of wheels, TA 5R Square 18x10 and D-Force LTW5 Square 18x9.5. Both in Powder Coated Repsol Orange. The mods list should answer any questions, but if there any, feel free to reach out.

The car has 112k miles. Running perfectly. Feel free to reach out and see for yourself.

2002 BMW M3
Vin # WBSBL93492JR13073
Mileage: 112k



Mechanical:

- Valve adjustment completed.
- Rogue Engineering Vanos oil line.
- New Rod bearings OEM (WPC) done at 103K miles( Rod Bearings were replaced at 70K, but did it anyway after purchase for peace of mind)
- ARP Rod Bolt Kit
- CPI Headers
- CPI Section 1 With HFC
- Custom 3" one side exhaust(Similar to Bimmerworld, Not installed, currently has Stock exhaust)
- Dinan Cold Air Intake
- Bimmerworld Silicone Air Intake Elbow
- CSF Triple-Pass Aluminum Radiator (not installed)
- ECS Tuning Silicone Hoses (not installed)
- Mishimoto aluminum Electric Fan Shroud (not installed)
- SPAL 16" Low Profile Fan ( not installed)
- CSF Oil Cooler ( not installed)
- Custom Tune ( 308HP and 242Lbs torque at the wheels)

DRIVETRAIN:

- BMW 3.85 gear set ( E92 M3)
- Racing Diffs Upgraded Clutch Packs and Diff Rebuild Kit
- J Fiber Carbon fiber Drive Shaft
- Polyurethane transmission mounts.
- Polyurethane Engine mounts

SUSPENSION/STEERING

- Rack Doctor ZHP (Yellow Tag) Steering Rack
- AST 4200 Coilovers( Less than 6,000 miles)
- 550 Lbs Front Springs with helper springs
- 900 Lbs Hyperco Rear Springs installed ( Flat ride calculated)
- 450 Lbs Rear springs( not installed)
- Rogue Engineering Monoball Rear Shock Mounts
- Ground Control Weight Jacks
- Turner Motorsport Adjustable Rear Camber Arms
- Turner Motorsport Adjustable camber/caster plates.
- Ground Control Adjustable Front Sway Bar
- Ground Control Adjustable Front Sway Bar Links.
- OEM front shock tower reinforcement plates.
- Reinforced Rear Subframe ( no prior Issues)
- Reinforced Rear Shock Towers
- Custom Rear X-Brace With Sub-frame Support
- Custom Front Strut Bar
- Poly Bushings Throughout

WHEELS/BRAKES:

- Alcon Front Big Brake Kit With Dinan Two Piece Rotors
- OEM CSL rear brake rotors.
- Stainless Steel Brake Lines
- Castrol SRF Brake fluid.
- Hawk HP Plus Brake Pads
- Hawk Ceramic Brake Pads for street use
- Brand New Set of Hawk DTC-60 Rear Brake Pads
- Turner Motorsport Front Hub Extenders
- BimmerWorld Wheel Stud/Black Nut Package
- 10 mm Spacers Front and Rear
- Custom Powder Coated BimmerWorld TA 5R Square 18x10 with 265/35/18 Yokohama Advan A052
- Custom Powder Coated D-Force LTW5 Square 18x9.5 with 275/35/18 Bridgestone RE71R

INTERIOR

- Interior Carpets Removed
- Sunroof Delete
- Custom Half Cage Powder Coated Repsol Orange
- VAC Motorsports Floor Pan Kit
- Sparco GRID-Q Seats
- Driver Side Brey Krause Seat Mount with Power Slider
- Passenger Side BimmerWorld base plate with VAC Motorsports Seat Mount
- Schroth Quick Fit Harnesses ( Installed)
- Schroth Profi 6 Point Harnesses ( Not installed)
- OMP Steering Wheel
- Rogue Engineering Quick Release Hub
- Alcantara Shifter and e-brake boots
- Carbon Fiber look door cards
- Radio Delete Panel
- Braile Lightweight Battery

EXTERIOR:

- Custom aluminum Front Splitter and Under Pan
- APR Carbon Fiber Wing with Custom Brackets
- Matte Black Front and side Gills
- Carbon Fiber Rear Diffuser
- Front Tow Hook
- Smoked Bumper Reflectors
- M3 Badge deleted

https://photos.app.goo.gl/6fBU6W11Hry97TQD8

[itsrichierich]

Beautiful car!