BMW E46 M3 - Legend Eternal
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
home
BIMMERPOST Universal Forums General Automotive (non-BMW) Talk + Photos/Videos

Post Reply
 
Thread Tools Search this Thread
      01-01-2017, 08:55 PM   #1
cruisingdownthestreet
Second Lieutenant
No_Country
122
Rep
258
Posts

Drives: Z4
Join Date: Oct 2016
Location: LA county

iTrader: (0)

What tools should a first-time car owner immediately invest in?

What tools should a first-time car owner immediately invest in in an increasingly electronic car world?

Last edited by cruisingdownthestreet; 01-01-2017 at 09:41 PM..
Appreciate 0
      01-01-2017, 09:16 PM   #2
Chihuahua
Brigadier General
Chihuahua's Avatar
4011
Rep
3,170
Posts

Drives: E30 329iS, E65 Alpina B7
Join Date: May 2012
Location: ATL

iTrader: (0)

obviously it totally depends on budget, but if you are on a shoestring budget and want to get started, I'd get the following:

basic generic OBD2 scan tool
full set of metric wrenches
full set of metric sockets with ratchets (and extensions), 3/8 and 1/4 drive
set of screw drivers
oil filter wrench
3/8 drive torque wrench
1/2 drive torque wrench with 17mm through 21mm sockets
Appreciate 5
      01-01-2017, 10:39 PM   #3
yousefnjr
salty cowboys fan
yousefnjr's Avatar
6112
Rep
3,389
Posts

Drives: ‘06 Z4MR, ‘20 X7, ‘22 M4x
Join Date: Dec 2012
Location: Bay Area, CA

iTrader: (2)

It's a never ending list really, just depends on how much wrenching you're planning on doing yourself, and also what car this is for. For DIY on a Z4, in addition to the above:

Low profile jack
Jack stands
Wheel chocks
Fluid drain pan
Adapters (1/4 to 3/8, 3/8 to 1/2, 1/2 to 3/8...)
Torx socket set
Allen socket set (metric)
Plier set

Not immediately important, but nice to have:
Pry bar
Breaker bar
Cordless impact
Tweezers set
Trim/push pin removal set
Telescoping magnet
Feeler gauge set
List goes on forever...

As with most things, you get what you pay for. Higher priced tools are often tougher, have better clearance, etc. Some things you can get away with being cheap, other things you'll have to consider as an investment if you'll be doing this often
Appreciate 1
      01-01-2017, 10:50 PM   #4
jfl503
Enlisted Member
jfl503's Avatar
United_States
3
Rep
34
Posts

Drives: ms daisy
Join Date: Jan 2016
Location: SF

iTrader: (4)

triple ay
__________________
DINAN E90 M3
Appreciate 1
      01-02-2017, 12:21 PM   #5
overcoil
Major General
3069
Rep
5,577
Posts

Drives: M235i 6spd
Join Date: Dec 2013
Location: Mid-Atlantic

iTrader: (0)

Quote:
Originally Posted by cruisingdownthestreet View Post
What tools should a first-time car owner immediately invest in in an increasingly electronic car world?
Good question. A few things I wanted to add.
Research Alldata
http://www.alldatadiy.com/?gclid=CLC...FYOPswodLjwGPg

And chk if Haynes or Bentley make a repair manual for their car.

OBDII reader are great also research FLUKE automotive multimeter ( what type of probes to buy), learning how to test a car battery or charge a car battery is worthwhile. Lots of people do it wrong.

As for hand tools: I wouldn't go out and buy a two-hundred piece set. It's nice to buy tools from a few different makers and get a feel for what you like.
If your tools are going to be in a garden shed where other might come across them, then I would NOT be leaving Snap-On tools in that shed. Or if taking tools to a race track, go with less expensive tools.

Craftsman has some nice ratchet handles, but I like my swivel head Easco.
And RATCHET SPINNERS are great for working under the dash.

I aquired my tools mostly buying what I needed for a particular job and accumulating through time.

As for brands, I like GearWrench tools. But for heavy jobs like 21mm sockets for suspension where I need a lot of power, I aquired Snap-On or Matco. But be smart if you walk onto one of their trucks you see at a dealership, those guys may try to take advantage and if your not familiar with pricing sell you an impact socket at some enormous price, when the hand-tool socket is 1/4 the price.
I really like my craftsman socket handle, but I like my swivel head Easco handle the best.

These things are lifesavers when working on alternators and water pumps.
http://m.sears.com/craftsman-3-pc-un...Q&gclsrc=aw.ds

Last edited by overcoil; 01-02-2017 at 01:17 PM..
Appreciate 0
      01-02-2017, 12:31 PM   #6
ZeeVaughn
Second Lieutenant
ZeeVaughn's Avatar
85
Rep
207
Posts

Drives: E92 335i 6MT SG/Coral
Join Date: Jul 2016
Location: Norcal

iTrader: (0)

Quote:
Originally Posted by ScottSinger View Post
I aquired my tools mostly buying what I needed for a particular job and accumulating through time.
+1

I started with basic tool sets that included metric and standard sizes etc. and acquired more specific and specialty tools by doing various DIY's. Just be ready to stop a job in the middle because you're missing a certain socket or tool and have to run to the store to grab one we've all been there.
Appreciate 1
Viffermike1753.00
      01-02-2017, 12:32 PM   #7
08njSTEP
Captain
08njSTEP's Avatar
795
Rep
762
Posts

Drives: '07 335i, '66 SS396 Chevelle
Join Date: Dec 2015
Location: Manchester, NH

iTrader: (0)

Only buy snap on used. Their prices are crazy. Great tools, but people sell their whole box full of tools on Craigslist for reasonable prices. I would only own a Snap-_on box though. They really are the best. Sooooo heavy duty. 1 time purchase, for life. But again buy used.
Appreciate 0
      01-02-2017, 07:49 PM   #8
chillindrdude
Lieutenant Colonel
chillindrdude's Avatar
1156
Rep
1,726
Posts

Drives: anything with 4 wheels
Join Date: Feb 2015
Location: Virginia

iTrader: (1)

torque wrench

good set of sockets, ratchet, and extender/flex joints

low angle ramps, jack, and jack stands.
__________________
My Trackable Street Car
2016 BMW M4 GTS
Appreciate 0
      01-02-2017, 10:33 PM   #9
Captain Apex
Banned
57
Rep
115
Posts

Drives: E92 M3 ZCP
Join Date: Nov 2016
Location: Westminster, MD

iTrader: (2)

something others have not posted:

- tire pressure gauge (I recommend Longacre)
Appreciate 1
      01-04-2017, 09:56 AM   #10
Jdub679
Captain
85
Rep
644
Posts

Drives: 2011 BMW 335i coupe M Sport
Join Date: Jan 2011
Location: Irvine, CA

iTrader: (1)

Quote:
Originally Posted by Kyle B View Post
obviously it totally depends on budget, but if you are on a shoestring budget and want to get started, I'd get the following:

basic generic OBD2 scan tool
full set of metric wrenches
full set of metric sockets with ratchets (and extensions), 3/8 and 1/4 drive
set of screw drivers
oil filter wrench
3/8 drive torque wrench
1/2 drive torque wrench with 17mm through 21mm sockets
Any recommendations for the OBD2 scan tool? I've got a beater '03 Toyota that I need to check a code on. Thanks.
Appreciate 0
      01-04-2017, 09:59 AM   #11
MightyMouseTech
Major General
MightyMouseTech's Avatar
4335
Rep
6,196
Posts

Drives: 13 135i 6MT LeMans Blue MSport
Join Date: Feb 2013
Location: Ottawa, Canada

iTrader: (0)

As a tech, most used tool is a 1/2" impact gun.
Appreciate 0
      01-04-2017, 10:21 AM   #12
overcoil
Major General
3069
Rep
5,577
Posts

Drives: M235i 6spd
Join Date: Dec 2013
Location: Mid-Atlantic

iTrader: (0)

Quote:
Originally Posted by MightyMouseTech View Post
As a tech, most used tool is a 1/2" impact gun.
pneumatic or electric ?
Appreciate 0
      01-04-2017, 11:03 AM   #13
MightyMouseTech
Major General
MightyMouseTech's Avatar
4335
Rep
6,196
Posts

Drives: 13 135i 6MT LeMans Blue MSport
Join Date: Feb 2013
Location: Ottawa, Canada

iTrader: (0)

Quote:
Originally Posted by ScottSinger View Post
pneumatic or electric ?
Well, at work I use pneumatic. I have a cordless electric for use at the track. Actually, have two pneumatic for at work, both are currently out for repairs (dammit!), and I am using my track cordless here at work.

If you have a compressor, get pneumatic.
Appreciate 0
      01-04-2017, 06:47 PM   #14
3GFX
Captain
3GFX's Avatar
Canada
723
Rep
912
Posts

Drives: 2003 BMW Z4 3.0i
Join Date: Sep 2015
Location: Ontario

iTrader: (0)

Toolbox...

...then slowly acquire any tool you need as you go. OBD Scanner for sure, and a good 100+ piece ratchet set. Torque wrench is a must.
Appreciate 1
selbyp93163.50
      01-05-2017, 01:27 AM   #15
cruisingdownthestreet
Second Lieutenant
No_Country
122
Rep
258
Posts

Drives: Z4
Join Date: Oct 2016
Location: LA county

iTrader: (0)

Quote:
Originally Posted by 3GFX View Post
Toolbox...

...then slowly acquire any tool you need as you go. OBD Scanner for sure, and a good 100+ piece ratchet set. Torque wrench is a must.
there's something about toolboxes i just don't like. i don't know why. it's kinda like seeing a shredded guy at the gym of the same ethnicity as you. you just wanna kick his ass out of YOUR gym
__________________
Appreciate 0
      01-05-2017, 09:23 AM   #16
3GFX
Captain
3GFX's Avatar
Canada
723
Rep
912
Posts

Drives: 2003 BMW Z4 3.0i
Join Date: Sep 2015
Location: Ontario

iTrader: (0)

The wifey got me a decent setup last year for fathers day or birthday.

Until that point I had all my tools in bins and drawers. Having everything in one spot and building tools and sets in certain drawers provides me with a personal sense of satisfaction.

I can happily say I have most of the common tools you'll ever need, plus a good selection of nuts, bolts, screws and other random gear.




ZIPTIES by the way, are essential
Appreciate 0
      01-05-2017, 09:26 AM   #17
insanecoder
Banned
1410
Rep
3,211
Posts

Drives: 340isDrive
Join Date: May 2016
Location: East Coast USA

iTrader: (0)

If you want to do regular maintenance:

Reputable ramps + reputable jack + dependable jack stands
Appreciate 0
      01-05-2017, 09:35 AM   #18
GuidoK
#buildnotbought
GuidoK's Avatar
10473
Rep
4,815
Posts

Drives: Z4 3.0i ESS TS2+
Join Date: Jul 2012
Location: Tinkering in the garage

iTrader: (0)

Quote:
Originally Posted by Kyle B View Post
full set of metric sockets with ratchets (and extensions), 3/8 and 1/4 drive
imho 1/2 and 1/4 drive. There are a lot of bolts on the undercarriage that have to be tightened beyond 3/8 spec.

A 3/8 set is comfortable to work with (lighter than 1/2 drive) but it's not a necessity.

Most important tool for working on bmw's: Laptop/tablet with TIS and some obd2 diagnostic capabilities: INPA/Rheingold if possible.
__________________
Z4 3.0i | ESS TS2+ supercharger | Quaife ATB LSD | Brembo/BMW performance BBK front/rear | Schrick FI cams | Schmiedmann headers+cats | Powerflex/strongflex PU bushings | Vibra-technics engine mounts | H&R anti rollbars | KW V3 coilovers/KW camber plates | Sachs race engineering clutch | tons of custom sh#t
Appreciate 0
      01-05-2017, 03:39 PM   #19
3GFX
Captain
3GFX's Avatar
Canada
723
Rep
912
Posts

Drives: 2003 BMW Z4 3.0i
Join Date: Sep 2015
Location: Ontario

iTrader: (0)

Quote:
Originally Posted by GuidoK View Post
rking on bmw's: Laptop/tablet with TIS and some obd2 diagnostic capabilities: INPA/Rheingold if possible.
Found this out the hard way....software currently on order
Appreciate 0
      01-05-2017, 03:41 PM   #20
R3dliner
Lieutenant Colonel
R3dliner's Avatar
United_States
935
Rep
1,930
Posts

Drives: 18 M3 6MT
Join Date: Mar 2016
Location: NYC

iTrader: (5)

carly for bmw is very useful. No laptop necessary and can diagnose and code from your iphone or android
Appreciate 1
      01-05-2017, 06:01 PM   #21
Bluewater328iT
Lieutenant
Bluewater328iT's Avatar
United_States
87
Rep
471
Posts

Drives: 2011 BMW 328iT
Join Date: Jan 2014
Location: New Rochelle, NY

iTrader: (0)

Quote:
Originally Posted by R3dliner View Post
carly for bmw is very useful. No laptop necessary and can diagnose and code from your iphone or android
Agreed. I have one as well.
__________________
BMWCCA member since 1990
Mods: 330 intake, ECU reflash & tune, Magnaflow cat back resonator & muffler, BMW Euro airbox, tinted windows
Appreciate 0
      03-10-2017, 07:39 PM   #22
Captain Apex
Banned
57
Rep
115
Posts

Drives: E92 M3 ZCP
Join Date: Nov 2016
Location: Westminster, MD

iTrader: (2)

Quote:
Originally Posted by cruisingdownthestreet View Post
there's something about toolboxes i just don't like. i don't know why. it's kinda like seeing a shredded guy at the gym of the same ethnicity as you. you just wanna kick his ass out of YOUR gym
well where do you put your tools? lol
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:54 AM.




e46m3
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST