01-31-2019, 05:30 PM | #1 |
Lieutenant
315
Rep 462
Posts |
2003.5 e46 M3 Track Car
Hey all Thought I'd post this here as well as I know there are quite a few track guys here as well. I basically copied my ad from the m3forum. Always available for any questions Most of the pics are in the below thread. Thanks! http://www.m3forum.net/m3forum/showthread.php?t=603184 -------------------------------------------------------------------------------------- 2003.5 Carbon Black Slicktop SMG ~67k Miles Clean Title Turnkey Car Hi Everyone I have been thinking about this for the past month whether to put the car up for sale or not. Ultimately it is just coming down to lack of time for tracking, and I think somebody else will get more enjoyment out of it. Perfect car for HPDEs, time trials, and not much work needed to make it W2W ready. I bought the car bone stock from a member here in June 2016 with 58k miles. The car is currently sitting at roughly 67k miles. It's SMG, slicktop. Pretty much every known weak link has been addressed. You are basically getting a turnkey car. I had started a build journal on this forum as my plan was to keep it, build it out with good parts, and progress to eventually competing with NASA. Over the last 2 years, I was able to get a total of 4 track days in, and I don't think next year is looking any better. Over these last 2 years I have touched almost everything. Almost everything is still new. Its a long list of modifications which I will list below. I have attached my Maintenance/Mod log and what I have invested so far over the last 2 years. I just wish I had more time to track but here I am. Car is in storage and not street driven. Car is still street legal and streetable, but its a bit rough due to the mods. Located in Des Moines, IA Asking $39,000 which I think is fair for the mileage and modifications. Additional spare parts will also be included, as well as original wheels which have winter tires on them. Always open to sensible offers. Don't hesitate to reach out with any specific questions 12/04/2018- Price drop - $36,000 Thanks! Mods List: Interior Status Gruppe CSL Console Status Gruppe Black Suede E-Brake Boot OEM CSL E-Brake Lever Assembly Coby Wheels Black Suede SMG Shifter Boot Turner Motorsport Aluminum Pedals Turner Motorsport Harness Retaining Guide Collars Schroth Racing Enduro Belts Cobra Sebring Pro-Fit GT Cobra Suzuka Pro-Fit GT Brey-Krause Seat Mounts with updated hardware KMP - Custom OMP Steering Wheel with Quick Release KMP - Custom Paddle Shift Kit Bimmerworld Carbon Cluster Delete AiM MXS with remote and sensors (Page Display wired to wheel button) Hard Motorsport Lightweight Door Panels with RS Pull Straps Custom Weld-In Half Cage Broadway Mirror Exterior Turner Motorsport Matte Black Front Grills Turner Motorsport Stealth Corner Bulbs Turner Motorsport Red Poly Tow Straps Depo Smoked Side Turn Signals Lamin-X Yellow Headlight Covers Umnitza Orion V4 LED Angel Eyes Trackspec Motorsports Hood Vents AeroCatch Fasteners Engine CSF Triple-Pass Aluminum Radiator CSF Oil Cooler SPAL 2049 16” Curved Blade Fan with N15 Custom Brackets (Shroud Deleted) Rogue Engineering CPV O-Ring Rogue Engineering VANOS Oil Line Rogue Engineering Coolant Vent Line Samco Silicone Hoses Turner Motorsport Power Pulley Kit Secondary Air Pump Delete and OEM Block Off Plate Supersprint V1 Stepped Headers Supersprint Catless Stepped Section 1 Supersprint Resonated Section 2 Supersprint Race Section 3 Schrick 288/280 Cams Karbonius CSL Airbox with OE Trumpets (Lang Racing MAP Adapter, AEM 1Bar MAP Sensor, Performance Eurowerks IAT Kit) Evolve Tune Bimmerworld Fuel Starvation Kit Full Beisan VANOS treatment (Solenoid, Seals, Rattle Repair, Oil Pump Disk, M5 Diaphragm, Lang Racing Bolts) Drivetrain/Suspension Turner Motorsport Solid Subframe Mounts Turner Motorsport Race Monoball Rear Control Arm Upper Inner Bushings Turner Motorsport Race Monoball RTABs Turner Motorsport Street/Track Rear Adjustable Camber Arms Turner Motorsport Rear Subframe Reinforcement AKG Front Subframe Reinforcement AKG Aluminum Steering Flex Shaft Coupling Custom Heavy Duty/Teflon Coated High Pressure Power Steering Lines Burkhart Engineering SMG Relocation Kit (Hydraulic Lines, Upgraded Fluid, Harness) SMG Relocated to Passenger Engine Bay bin Rogue Engineering Monoball Rear Shock Mounts Rogue Engineering Rear Spring Perch Reinforcement Rogue Engineering Differential Bushings JRZ RS Pro HyperCo 800/900 Springs with front helpers and couplers Ground Control Race Camber Plates Bimmerworld TrackCAB FCABs Vibra-Technics Engine and Transmission Mounts Brakes/Wheels Apex Arc-8 18” et35 Squared Nankang NS2R 265/35/18 Apex Wheel Studs AP Racing/Essex Radi-CAL 5000R Front Kit Ferodo DSUNO Front (RFP3144Z) Pagid RSL 29 Rear Spiegler Stainless Steel Front Brake Lines CSL/CP Rear Rotors Turner/Stoptech Rear Brake Lines Bimmerworld Rear Solid Brass Brake Caliper Guide Kit Spare Parts/Items included with sale -BNIB Stoptech Slotted Rear Rotors -2 sets of rear pads (PFC Z) and (Ferodo DS3000)- both almost new -5 bottles of AP Racing R2 Brake Fluid -2 bottles of Motul Gear 300 -2 bottles of Motul Gear Competition -2 bottles of Motul 300V 20w60 Racing Oil -3 1/2 bottles of Rowe Racing 10w60 Racing Oil -1 bottle of Castrol TWS 10w60 -1 Mahle Oil Filter -1 New Bosch Ignition Coil -2 jugs of BMW Coolant/Antifreeze -BNIB Anti-Gavity ATX-20 Lightweight battery with terminals -2 sets of brand new Race Safety Seat Mounts -2 sets of BNIB BMW tire totes -1 full set of brand new seat cushions for the drivers seat -Brand New Mac's Tow Straps - T-Hooks |
04-10-2020, 08:47 PM | #3 |
Lieutenant
315
Rep 462
Posts |
|
Appreciate
0
|
04-10-2020, 08:48 PM | #4 |
Captain
705
Rep 870
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|