[M3ANMACHINE]

Up for sale are my Super Aggressive VMR VB3's.

Purchased these about 6 months ago direct from VMR.

Sizes are:

19x9.5 +22
19x10 +25

In the photo's below I am running a 10mm spacer in rear as well as
245/35/19
275/30/19
Tires Not Included In Sale!

I would recommend rolling your rear fenders to accommodate the rears if you run a spacer, but rolling the front is most likely necessary depending on your ride height. There shouldn't be much rubbing unless you're slammed, even then, it will only be on the front fender liner.

Only imperfection is a small "curb rub" on the drivers side front wheel about 2 inches long. More like a scuff. Because the wheels are silver, it's unnoticeable from more that 6 inches away. I will post pix of the imperfection ASAP.

Asking price is $850 + shipping.
Any reasonable offers are considered.


Located in SoCal. Local pick up preferred.

If you don't like my price, please do not post in my thread. I will deal with my own pricing based on interest. I am not in a huge hurry to sell.

Thank You!

Pictures:


1.

2.

3.

4.

5.

6.

7.

[Evil///M]

Oh wow. sexy... really cheap price too!
Im trying to sell mine also >_>
Good luck!

[YaoBRC]

M3anMachine, your M3 with the VMR's is one the hottest M3's i have ever seen!

Originally Posted by M3ANMACHINE

Up for sale are my Super Aggressive VMR VB3's.

Purchased these about 6 months ago direct from VMR.

Sizes are:

19x9.5 +22
19x10 +25

In the photo's below I am running a 10mm spacer in rear as well as
245/35/19
275/30/19
Tires Not Included In Sale!

I would recommend rolling your rear fenders to accommodate the rears if you run a spacer, but rolling the front is most likely necessary depending on your ride height. There shouldn't be much rubbing unless you're slammed, even then, it will only be on the front fender liner.

Only imperfection is a small "curb rub" on the drivers side front wheel about 2 inches long. More like a scuff. Because the wheels are silver, it's unnoticeable from more that 6 inches away. I will post pix of the imperfection ASAP.

Asking price is $850 + shipping.
Any reasonable offers are considered.


Located in SoCal. Local pick up preferred.

If you don't like my price, please do not post in my thread. I will deal with my own pricing based on interest. I am not in a huge hurry to sell.

Thank You!

Pictures:


1.

2.

3.

4.

5.

6.

7.

[gt3fever]

Pm'ed

[M3ANMACHINE]

Sorry, forgot about this thread.

Wheels have been sold!

[YaoBRC]

Originally Posted by M3ANMACHINE

Sorry, forgot about this thread.

Wheels have been sold!

glad you sold the wheels!

question, if you ran 19x8.5 and19x9.5 vmr's all around...what size spacers would you put the get the wheels as far out in the edge of the fender without needing to roll the fender's inside?

this is with hr or eibach sport lowering spring!

would 10mm front and 12mm rear work?

thanks man!!