BMW E46 M3 - Legend Eternal
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
home
E46 M3 Coupe and Convertible Forum General E46 M3 Forum

Post Reply
 
Thread Tools Search this Thread
      04-21-2023, 07:21 PM   #1
Katerin
Registered
0
Rep
3
Posts

Drives: 2001 M3 E46 Coupe
Join Date: Apr 2023
Location: Spain

iTrader: (0)

Oil leak / Origin?

Hi All!

For the last 2-3 years we have an oil leak somewhere under the hood that drops into the botton plastic protector, even through the sway bar. This leaking only happens when a reasonable number of kilometers are driven. Not when 5-10km.

We firstly replaced the top gasket in the motor and the top part of the motor is dry since then. However, oil keps dropping. We replaced a bolt in the back side of the motor that seems useless (kinda as to cover a casting hole or similar), and the backside of the motor never was humid again.
Since the oil pan was really wet, the next to be replaced (in last Christmas indeed) was the related gasket. But we kept having oil in the lowest corner of the oil pan to motor connection edge. So we added some silicone to that corner to grant (or try to grant) this would not leak. But the oil dropping persists... and such an oilpan-motor edge is still wet over the silicone.
The vanos lower area seems to be dry (dirty though). So we wonder if the problem could still be the oil pan gasket, or maybe the cylinder head gasket?
We cleaned the dirt with brake clener, but it is not possible to remove it all without disassembling many parts.
I provide some pictures in case these help (the silicone can be appreciated in one of them).

Any suggestion on how to identify the origin of the leak? Where this may come from?
Thanks a lot!
Kate
Attached Images
    
Appreciate 0
      04-26-2023, 03:05 PM   #2
y2k_o__o
Private
10
Rep
52
Posts

Drives: 2003 Z4 Titanium Silver
Join Date: Nov 2013
Location: Richmond, B.C

iTrader: (0)

Looking from the last picture, the head is clean while the block is dark.
Oil is leaking through the interface which suggest head gasket leak.

If it is valve cover, both head and block should be dark
Appreciate 0
      05-03-2023, 03:35 PM   #3
JayR_e92
First Lieutenant
JayR_e92's Avatar
No_Country
250
Rep
390
Posts

Drives: F87 M2 Competition 6MT
Join Date: Jan 2017
Location: Beaverton, Oregon.

iTrader: (1)

It’s worth checking to see if any of the oil you are seeing is coming from your CPV. (Constant pressure valve)

It’s very common on e46 M3’s and luckily it’s a pretty simple fix
__________________
Jet Black E92 M3 DCT (sold)
Space grey E92 M3 6MT (sold)
Black Sap. F15 xdrive35i M Sport (Daily) current
Titanium silver E46 M3 (OEM project) current
Appreciate 0
      05-19-2024, 04:38 PM   #4
M3 Tam
Registered
0
Rep
1
Posts

Drives: BMW M3
Join Date: May 2024
Location: UK

iTrader: (0)

Did you ever get to the bottom of this leak?

I have exactly the same on mine. About to replace vanos seals but I suspect head gasket. Compression test is normal mid to high 70s.

I've bought the CPV gasket but cannot see any visible oil around the CPV itself.

Been looking for this leak good months now.

TIA
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 09:41 PM.




e46m3
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST