01-04-2015, 02:11 PM | #595 |
-
11818
Rep 23,187
Posts |
This applies to me I think.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
01-10-2015, 06:04 PM | #596 |
-
11818
Rep 23,187
Posts |
went to a certified scale today and wasnt as good of news as i had hoped. raining out and had a non-cycled new set of maxxis rc1s on. was not fun loading on the trailer car tried to step off sideways. put a some traction tape on the ramps as well as put one hoosier wet on the rear and was fine. As for the number it was dead on 3000 lbs with just under half tank. So between 2950-2960 with no gas. about 50 lbs more than i had hoped.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
01-10-2015, 09:38 PM | #597 | |
Major
204
Rep 1,164
Posts |
Quote:
__________________
Akra GT4 / MS Stage 2 / MS UDP / BPM Tune / KW CS / H&R Sways / TMS Delrin / ST 380/355 BBK / Cantrell 2.5" Ducts / SR34 Pads / Apex Arc-8 / Hoosier R7's / Mode GT4 Splitter / GT4 Canards / APR GT-250 Wing / Cantrell Half Cage / Recaro Pro Racer / Schroth Profi II-6 / BMW Alcantera Wheel / Cool Shirt / ESS Fire Supp / Solo DL |
|
Appreciate
0
|
01-11-2015, 09:10 AM | #598 |
Major General
1581
Rep 8,077
Posts
Drives: 11 E90 M3 Individual
Join Date: Mar 2006
Location: Houston, TX
|
Alcantara shift boot? Really?
__________________
2018 F30 320iX Melbourne Red
2011 E90 M3 Monte Carlo Blue 2004 E46 M3 Imola Red 2000 E36/7 Z3 Steel Blue |
Appreciate
0
|
01-11-2015, 09:30 AM | #599 |
-
11818
Rep 23,187
Posts |
I didn't buy it. Don't be jealous though matches the omp wheel.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
01-11-2015, 10:11 AM | #600 | |
Major General
1581
Rep 8,077
Posts
Drives: 11 E90 M3 Individual
Join Date: Mar 2006
Location: Houston, TX
|
Quote:
Do you have the BW race exhaust?
__________________
2018 F30 320iX Melbourne Red
2011 E90 M3 Monte Carlo Blue 2004 E46 M3 Imola Red 2000 E36/7 Z3 Steel Blue |
|
Appreciate
0
|
01-11-2015, 01:07 PM | #601 |
-
11818
Rep 23,187
Posts |
Yes back half cage only. BW race, braille battery, sound deadening scraped, cf sunroof blank, wiring thinned, no airbags, control modules, stereo equipment. Hard to get as low as I want.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
01-11-2015, 04:14 PM | #602 | |
Major General
1581
Rep 8,077
Posts
Drives: 11 E90 M3 Individual
Join Date: Mar 2006
Location: Houston, TX
|
Quote:
I'm curious to find out what it takes to lose the charcoal canister in the rear.
__________________
2018 F30 320iX Melbourne Red
2011 E90 M3 Monte Carlo Blue 2004 E46 M3 Imola Red 2000 E36/7 Z3 Steel Blue |
|
Appreciate
0
|
01-11-2015, 04:21 PM | #603 |
-
11818
Rep 23,187
Posts |
Yes door panels are out. Gutting them or going to cf doors is worth bunch of weight and money. No lexan windows.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
02-20-2015, 10:01 PM | #604 |
-
11818
Rep 23,187
Posts |
going to PR tomorrow and trying out the new maxxis rc-1. knock some rust off an hopefully get back up to speed.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
02-20-2015, 11:02 PM | #605 |
First Lieutenant
43
Rep 386
Posts |
|
Appreciate
0
|
02-22-2015, 12:21 PM | #607 |
-
11818
Rep 23,187
Posts |
Ran pacific raceways yesterday on the new maxxis rc1. Right now not too impressed but could be operator error as I'm kind of rusty. My lap times fell between what a new nt01 and a almost corded fast nt01 can do.So they are faster out of the gate than an nt01 but not quicker than them at their best which is a disappointment. I was hoping for a quicker tire than nt01s with similar wear. They do look like they will wear fairly long so may be a viable option if they maintain same pace throughout their lifespan.
Fast group yesterday that included 4 ferrari challenge cars, 2 gt3 cup cars, new z06 and a laferrari which I had never seen but he was taking it very easy. |
Appreciate
0
|
02-22-2015, 02:08 PM | #608 |
-
11818
Rep 23,187
Posts |
have my own video of the pass which wont upload so here is me getting by a laferrari loafing around. happen about 4 miuntes in i think after i pass the brz.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
02-22-2015, 03:46 PM | #609 |
-
11818
Rep 23,187
Posts |
think my video works now. nothing special but the laferrari was pretty spectacular to look at. all the active aero is pretty sick.
https://www.youtube.com/edit?o=U&video_id=ch-kuRk8yO8
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
02-24-2015, 01:44 PM | #610 | |
Lieutenant Colonel
746
Rep 1,848
Posts |
Quote:
|
|
Appreciate
0
|
02-24-2015, 01:52 PM | #611 |
-
11818
Rep 23,187
Posts |
|
Appreciate
0
|
03-02-2015, 09:48 AM | #612 |
-
11818
Rep 23,187
Posts |
update. picked up a used ezcarlift yesterday from a fellow member, thanks wootwoot at a great price. I couldnt pass it up as this will make my life much easier. im on jack stands a lot and every time after i get home from the track i pull all 4 wheels to clean them and access where to rotate the tires based on wear. also check brakes and do inspection.
ezcarlift is a mechanical lift that is rated to 4400 pounds and looked at them before as an option but price was too steep i thought at retail. have to go out today and get a different corded drill as they require on with 8 amp rating and my old craftsman wont cut it. probably pick up a millwaukee to match my impact.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
03-02-2015, 12:53 PM | #613 |
-
11818
Rep 23,187
Posts |
heres a few shots of the lift at almost full height. the bumper is about waist high giving lots of room underneath to do bigger projects. lift time is pretty slow but will mostly use it only couple inches off the ground for wheel and brake stuff.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
03-08-2015, 09:20 PM | #614 |
-
11818
Rep 23,187
Posts |
Not a very fun track day today. Spent the last week cleaning up the car after winter projects on it and it promptly sprung a oil leak. The oil return line at the bottom of the pan cracked and ended my day. Luckily caught early and no damage just came home drained the oil and replaced the line.
|
Appreciate
0
|
03-29-2015, 06:18 PM | #616 |
-
11818
Rep 23,187
Posts |
some oddly shaped boxes came in the mail yesterday.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|