Bootmod3 m5 dyno numbers

[ghanii]

hello everyone today I'm showing you my dyno number from my most recent run i hope this helps you guys be able to see when your car is in terms of mods and to see the potential of getting a ots tune from bootmod3 because i searched everywhere any could not find any whp numbers.

Mods
-vrsf cattless down pipes
-gamma project front mount intakes
-ngk 2 step colder plugs gapped to 0.20mm
-BM3 ots stage 2 e30 tune aggressive burbles
-XHP STAGE 3 transmission tune at 20bar of pressure

link to video-https://youtu.be/IDT3ts15EP0?si=rXZlMH3ieQTNs-Do

[Boosted M5]

Great numbers! I got mid 600 but I have no intakes and I used 100 oct. MP flash tune stage 2 with gutted oem cats. Let me know how your clutches handle.

[ghanii]

Originally Posted by Boosted M5

Great numbers! I got mid 600 but I have no intakes and I used 100 oct. MP flash tune stage 2 with gutted oem cats. Let me know how your clutches handle.

I’ve put about 10,000 miles with this tune on and so far the clutches have held up great I would recommend if you don’t have it to get an XHP stage 3 transmission tune because it does definitely help the clutch pack Stay alive longer because of the increase pressure in the clutch lines to help prevent clutch slip.

[Boosted M5]

No way! I didn’t know that would help. Torque on mine is 673 so definitely always thinking about when the clutches will start to complain. Just when I thought I was done modify the car 🤦🏻‍♂️.