Up for sale is a set of 4 refinished Porsche 996 brake calipers made by Brembo. These calipers, along with Rally Road adapter brackets, Rally Road brake lines, brake pads and ZCP front rotors come together as an affordable BBK upgrade for the BMW E46 M3 and Z4M. Calipers are ready for installation on a E46 M3, no additional work needed.
Part numbers for the calipers
• 996.351.426, 996.351.425 (front)
• 996.352.422, 996.352.421 (rear)
These calipers were sourced from a wrecked Porsche. They were inspected, cleaned and rebuilt with new seals/dust boots. In addition, the front calipers have been machined 5.5 mm and the rear crossover lines have been switched from left to right and vice versa. Once you acquire all the additional parts, these calipers can be bolted straight on- no additional work needed.
The calipers are painted, not powder coated. I did the paint myself, and it is respectable, but not perfect. Some small flaws are present throughout, but will not be noticeable once the brakes are on a car. The insides have a bit of a rough texture in some small areas. Paint is heat resistant and has been cured in an oven, but is still not as durable as the original Brembo finish. I am not a professional but am proud enough of this paint job I would put these calipers on my own car. If you are a perfectionist a powder coated set would be more ideal for you. One caliper has a few small scuffs on the inside from making contact with a rotor. This has been painted over and is not visible from the outside.
Approximately $1k of additional stuff is needed to complete the conversion in addition to these calipers, $1500 if you would like ZCP rear rotors (stock E46 M3 rotors will work). I have compiled a shopping list and can send this to the buyer.
As a free bonus, I am including a set of caliper hardware and front brake pad dampeners.
Asking
$1400 shipped for the calipers, local pickup available in Fairfax, VA.
Listing is for calipers only, does not include adapter brackets, brake lines, pads or rotors.
